TORK CRAFT POLISHING BONNET WOOL HOOK AND LOOP 125MM 5′ SPC00123

hook and loop polishing wool buff

Diameter: 125mmUse backing pad:SPC00120

Application:

The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with hook and loop. Make sure the diameter of the polishing buff is the same as the backing pad’s diameter.

It is necessary to polish a vehicle body panel when:

• The panel has been newly painted with a clear-coat.
• Shallow scratch marks need to be removed.
• The panel has suffered from oxidation.
• Swirl marks and hologram defects need to be removed.

TIP:The buff is washable after use if the polishing compound is soluble.

hook and loop polishing wool buff range:

Recommended polishing compounds to use:

• Liquid Shine High cut – Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
• Liquid Shine Fine cut – similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
• Liquid Shine Zero swirl – Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step

SPC00123Abrasive/Grinding/Polish> Polishing> Lambswool